R&D will construct and deliver one of the world’s largest test benches following the turnkey order from LORC.

Share article

The project requires more than 25,000 hours, 310 tons of steel and 107 concrete piles in order to design, construct, build and install the test bench with a length of 31 meters, a width of 8 meters and a height of 13 meters.
The foundation for the test bench is built as a reinforced concrete foundation with a volume of approximately 1,500 m3. The foundation requires more than 100 tons of steel plates and 300 steel bars to transfer the loads from the tester and the device under test.

The order underlines R&D’s competences and their system understanding which are required for the complete delivery of complicated heavy-duty turnkey systems.

It requires both the right competences and many years of work to get the right experience.

Peter Kattai Ulrikkeholm
Business Unit Director, R&D

Huge loads and test subjects

The test bench functions primarily as a wind load simulator for highly accelerated life-cycle testing (HALT) of wind turbines. The hydraulic Test Load Unit functions as the wind simulator and can simultaneously replicate the reactions of the wind on the main axle of the test subject using three forces and three torque levels. The Test Load Unit can add a bending moment of up to 25MNm to the test subject in addition to the drive motor system and drivetrain, which can add a torque of 14.5MNm to the test subject. The test bench is thus a large mechanical, hydraulic and electrical wind tunnel for accelerated fatigue tests.
The drive train includes the world's largest flexible clutch with a built-in safety device, which limits the torque in case of driving line errors. The consequences of uncontrollable errors can be severe when the test subjects weigh 400 tons.

R&D has obtained the experience and the competences required for the full responsibility of a delivery this large and complex. ”One of the biggest challenges when developing heavy-duty system solutions is to have the right understanding of the system, ” Peter Kattai Ulrikkeholm says, Business Unit Director at R&D. ”It requires both the right competences and many years of work to get the right experience. In recent years, we have seen an increase in projects where we have the primary responsibility for the turnkey system, which is another reason why we are capable of the project in question.”

All competences internally

R&D has all the competences needed including project management, mechanics, power, automation, software and hydraulics as well as installation and maintenance. ”It is very beneficial to have all the competences internally when working on turnkey systems, ” Peter Kattai Ulrikkeholm says. ”This way, we ensure that all parts of the solution are considered already during the designing phase. At the same time, we can also control all of the elements of the process better and act quickly if a question arises or there is a need for changes in the development process.”

The preliminary work on the HALT test bench for LORC began several years ago and included the experience from a collaboration with Aalborg University in a EUDP project. In this project, R&D developed, tested and constructed a demonstration of the HALT test bench for accelerated tests of lifetime of wind turbines scaled down to ¼ of the normal size. The experience from this development work has provided some valuable input for the solution to LORC.

The work has begun

The first initiatives towards the new test bench were begun in spring 2015 and R&D has already used the first 3,000-4,000 hours working on the project. The employees at R&D will work intensively throughout the next year to construct and install the test bench as LORC has already lined up the first customers for their new testing facilities.

The LORC delivery provides new opportunities for R&D. ”We have been among the world’s leading companies in developing and constructing heavy-duty test benches for the wind industry for several years, ” Peter Kattai Ulrikkeholm says. ”This delivery brings us into a different league and it has been confirmed that the market sees us as the right collaborator for the largest projects. In the future, we will use this for other industries,” he concludes.

HALT Test bench

HALT is an abbreviation of Highly Accelerated Life-cycle Testing. The test bench enables manufacturers to simulate 25 years of service life in just 6 months.

Project stats

4000 tons
Weight of the test bench
25 years
Simulated service life
6 months
Testing time

Specifications

1500 m3
Concrete foundation
Concrete piles
200 tons
Reinforcing steel
300
Steel bars

How can we help you?

Contact persons
R&D Contact Nicolas
Nicolas Gjerlev Andersen
Project Director - Wind
R&D Contact Peter
Peter Ulrikkeholm
Business Unit Director / Head of Sales - Global
Send us a message