ORE Catapult has chosen R&D’s Rain Erosion Tester, which is designed to simulate the effects of rain erosion at the tips of wind turbine rotor blades.

Share article

Erosion resistance is important because a lack thereof can lead to peeling of the blade surface, which results in aerodynamic inefficiency and a potentially large power loss. R&D’s Rain Erosion Tester enables ORE Catapult to test erosion on various surfaces at the tips of their wind turbine rotor blades.

Tests of the rotor blades will lead to a better understanding of the effect which rain erosion induces on materials. A better understanding of the fundamental physics of erosion, and how it can be reduced will lead to greater efficiency and reduced costs in the development of protective coatings and materials. The test rig will complement ORE Catapult’s extensive blade testing capabilities and research activities and enable them to provide technical analyses and interpretation of test results for their customers.

The rain erosion test rig is an appreciated addition to ORE Catapult's extensive blade research activities and testing capabilities.

Kirsten Dyer
Research Material Engineer, ORE Catapult

Extensive blade testing capabilities

The addition of R&D’s Rain Erosion Tester to ORE Catapult’s extensive blade testing capabilities reinforces their position as a world-leading expert in wind turbine blade testing. “The rain erosion test rig is an appreciated addition to ORE Catapult’s extensive blade research activities and testing capabilities. It will allow turbine and blade manufacturers to investigate and reduce the effects of rain erosion on turbine blades and test new types of materials and protective coatings,” Kirsten Dyer says, Research Materials Engineer at ORE Catapult.

ORE Catapult has chosen the Rain Erosion Tester as a complete container solution. This set-up has made it possible to ship the test rig from Denmark followed by arrival and installation in UK the same week. The Rain Erosion Tester has been delivered in three 20-foot containers and is ready for use after the initial running-in. R&D will assist ORE Catapult with commissioning, SAT tests, and training of employees.

Proven level of repeatability

R&D offers a turnkey solution which includes the rain system, a rotor with test specimen holders, drainage, ventilation and control system delivered in a housing of 20-foot containers. This test system has a proven level of repeatability and fulfils DNV GL’s Recommended Practice (DNVGL-RP-0171) for the testing of rotor blade erosion protection systems.

Adjustable test parameters

2.0-2.5
Droplet size (diameter)
200 - 400
Drop height (mm)
29 - 56
Rain intensity (mm/h)
63 - 173
Test specimen tip speed (m/s)

How can we help you?

For more information on our Rain Erosion Tester, please contact us.

Contact person
R&D Contact Peter
Peter Ulrikkeholm
Business Unit Director
Send us a message